H3138 Naura Bearings Adapter Sleeve Bearing 170x190x 141mm

T min.:-20 °C; d1:58 mm; B1:46 mm; C:40.56 kN; Designation of bearing:UK308G2H-20; N1:27 mm; Adapter sleeve reference:H2308-20; B:35 mm; H2:116 mm; H:60 mm;

Fit:J7; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Diamond Flange Shape; Stroke:No; Machining:No; Grease Type:SH44M; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Diamond Flange Shape;

Seal:Silicone; Basic Load Rating, Static Rating(N):23300; Fit:J7; Rolling Element Material:Bearing Steel; Stroke:No; Unit Body Material:Cast Iron; d:45; Basic Load Rating, Dynamic Rating(N):35100; Grease Type:SH33M; Stroke:No;

Fit:J7; Unit Body Material:Cast Iron; Accessory:With cast iron cover; Rolling Element Material:Bearing Steel; Machining:No; Days to Ship:Quote; Surface Treatment:No; Stroke:No; Stroke:No; Unit, Type:Insert Bearing Unit;

rs min:1.5 mm; d1:110.5 mm; Da max:142 mm; Fatigue limit load, Cu:2.2 kN; Characteristic inner ring frequency, BPFI:8.4 Hz; Radial clearance class:C3; B:24 mm; Nlim:2,600 rpm; Characteristic cage frequency, FTF:0.44 Hz; Static load, C0:54.2 kN;

Bearing I.D. d(mm):35; Volume Discount:Available; RoHS:6; Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):104; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days;

rs min:1.5 mm; d1:110.5 mm; Da max:142 mm; Fatigue limit load, Cu:2.2 kN; Characteristic inner ring frequency, BPFI:8.4 Hz; Radial clearance class:C3; B:24 mm; Nlim:2,600 rpm; Characteristic cage frequency, FTF:0.44 Hz; Static load, C0:54.2 kN;

Designation of housing:PLE209-; A1:35 mm; G:M6x1; d:44.45 mm; T min.:-20 °C; T max.:100 °C; N1:24 mm; Designation of bearing:ES209-28G2; H:52.4 mm; s1:33.4 mm;

rs min:1.5 mm; d1:110.5 mm; Da max:142 mm; Fatigue limit load, Cu:2.2 kN; Characteristic inner ring frequency, BPFI:8.4 Hz; Radial clearance class:C3; B:24 mm; Nlim:2,600 rpm; Characteristic cage frequency, FTF:0.44 Hz; Static load, C0:54.2 kN;

Designation of housing:PLE209-; A1:35 mm; G:M6x1; d:44.45 mm; T min.:-20 °C; T max.:100 °C; N1:24 mm; Designation of bearing:ES209-28G2; H:52.4 mm; s1:33.4 mm;

S:12.7 mm; L1:22 mm; C:12.8 kN; Z:45.6 mm; N:M10; E:13 mm; Recommended tightening torque for set screw:5.5 Nm; A:40 mm; A1:22 mm; H:30.2 mm;

RoHS:6; Width T(mm):25; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Shape:Flanged Pilot Type; Flange O.D. H(φ):47; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Holder Surface Treatment:Not Provided; Bearing Part Number:6801;

Fit:J7; Unit Body Material:Cast Iron; Accessory:With cast iron cover; Rolling Element Material:Bearing Steel; Machining:No; Days to Ship:Quote; Surface Treatment:No; Stroke:No; Stroke:No; Unit, Type:Insert Bearing Unit;

S:12.7 mm; L1:22 mm; C:12.8 kN; Z:45.6 mm; N:M10; E:13 mm; Recommended tightening torque for set screw:5.5 Nm; A:40 mm; A1:22 mm; H:30.2 mm;

Fit:J7; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Diamond Flange Shape; Stroke:No; Machining:No; Grease Type:SH44M; RoHS:6; Unit Body Material:Cast Iron; Bearing Unit, Type:Diamond Flange Shape;