Timken Fafnir W208PP21

T max.:100 °C; J:50.8 mm; s1:12.5 mm; L1:18 mm; T min.:-20 °C; A:32 mm; L:65 mm; G:R1/8"; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PAE204-;

L:86 mm; A:29.5 mm; s1:11 mm; Designation of open end cover:SCOU201-08; Designation of housing:FE203N-; A2:35 mm; N:11,5mm; J:63.5 mm; Weight:0.41 kg; B:22 mm;

Days to Ship:8 Days; Number of Bearings:Double; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Width T(mm):30; Seals:ZZ (Double Shield);

Days to Ship:8 Days; Number of Bearings:Double; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Width T(mm):30; Seals:ZZ (Double Shield);

Dynamic load, C:2.24 kN; Min operating temperature, Tmin:-60 °C; d:7 mm; Mass:0.008 kg; ra max:0.3 mm; D:19 mm; Da max:17 mm; Static load, C0:0.91 kN; Fatigue limit load, Cu:0.04 kN; B:6 mm;

d:22.22 mm; Weight:0.19 kg; d1:37.4 mm; C0:7.88 kN; B:21.4 mm; B1:30.9 mm; SW:3.18 mm; C:15 mm; m:5 mm; C1:4.3 mm;

Product Group:B00308; Nlim (grease):30,000 rpm; Inch - Metric:Metric; ra max:0.6 mm; Maximum Capacity / Filling Slot:No; Static load, C0:1.96 kN; D:26 mm; Noun:Bearing; Da max:22 mm; UNSPSC:31171504;

D3 max:64.82 mm; f:1.65 mm; da min:45 mm; r0 max:0.6 mm; Da max:63 mm; Characteristic outer ring frequency, BPF0:5.12 Hz; f0:15.3; Fatigue limit load, Cu:0.52 kN; D1:62.1 mm; b min:1.9 mm;

T max.:100 °C; Recommended tightening torque for set screw:27.1 Nm; G:M6x1; d:69.85 mm; s1:37.3 mm; A3:2 mm; SW:5.56 mm; C0:45 kN; B:74.6 mm; Weight:3.66 kg;

Designation of housing:FLE209N-; C:31.85 kN; B:30.2 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of open end cover:SCOE209-45; d:45 mm; Designation of bearing:ES209G2T04; Dz:95 mm; T max.:100 °C; A1:13 mm;

Dynamic load, C:2.24 kN; Min operating temperature, Tmin:-60 °C; d:7 mm; Mass:0.008 kg; ra max:0.3 mm; D:19 mm; Da max:17 mm; Static load, C0:0.91 kN; Fatigue limit load, Cu:0.04 kN; B:6 mm;

T max.:100 °C; Recommended tightening torque for set screw:27.1 Nm; G:M6x1; d:69.85 mm; s1:37.3 mm; A3:2 mm; SW:5.56 mm; C0:45 kN; B:74.6 mm; Weight:3.66 kg;